Hi all, I know it’s probably a very basic thing, but can someone advise how I set up my Mac studio to connect to a Dell monitor ultrasharp 32 4k U3225QE, as in a guide for dummies, thanks
[Re-Titled by Moderator]
that appears to be a 3840 by 2160 ("4K") display with 10 bits/color HDR
interfaces include:
1x DisplayPort 1.4 (low resolution unless connected through a ThunderBolt Docking station)
1x HDMI 2.1 <--- connect this port directly to your Mac using a certified ULTRA rated cable 8K @ 60
1x ThunderBolt-4 -- connect with a Thunderbolt-3 or -4 cable up to 0.5 meters log, or a much more expensive ACTIVE ThunderBolt cable use to several meters.
I don’t know the monitor but if it has a HDMI connector use that, straight from the Studio.
Thanks a mill, manages to figure it out and it’s working
For referemce: Dell – Dell UltraSharp 32 4K Thunderbolt Hub Monitor - U3225QE
There should be online documentation under the "Drivers, Manuals & Support" section.
How do I connect my Mac Studio to Dell UltraSharp 32 4K?
